
Campervan insulation: Vanflex joining tape 15 m x 5 cm, at Braguscamp
The Vanflex joining tape, 15 m x 5 cm, is the finishing piece of any elastomeric campervan insulation job. It is made of flexible elastomeric insulation with a strong adhesive, and it seals the joins between pieces of insulation on walls, roof and doors so that the layer stays continuous, without gaps that let heat, cold, moisture or noise through.
With 15 metres of length and a width of 5 cm, one roll of tape covers many joins without constant cuts. It is black, so it blends discreetly with the insulation and stays out of sight once the panels are in place. Using it is simple: cut the length you need, peel off the liner and press it over the join.
The tape is designed to work with the four Vanflex insulation rolls sold by Braguscamp, in 10 mm and 19 mm thickness and in 7.5 m² and 15 m² formats, and it also suits other elastomeric insulation. We ship it to Spain and Europe together with the rest of your conversion material.
Why use the Vanflex joining tape
15 m x 5 cm
A long roll with a generous width to cover the joins of a whole build.
Strong adhesion
A powerful adhesive keeps the tape in place, even with temperature changes and humidity.
Avoids thermal bridges
Sealing the joins keeps the insulating layer continuous on walls, roof and doors.
Flexible material
Elastomeric tape that follows curves, corners and ribs of the bodywork.
Discreet black finish
Blends with the insulation for a tidy, professional-looking result.
Cut, peel and stick
No special tools required: cut, remove the liner and press into place.
Features of the Vanflex 15 m x 5 cm joining tape
Made for elastomeric insulation joins
When you insulate a van piece by piece, every join between two sheets is a potential weak point. The Vanflex joining tape covers those joins with the same type of flexible elastomeric material, so the insulation behaves as one continuous layer. It is the simplest way to give a professional finish to walls, roof and doors before fitting the interior panels.
15 metres long and 5 cm wide
The roll measures 15 m x 5 cm. The length lets you tape long joins on side walls and roof without constantly opening new rolls, and the 5 cm width leaves enough material on each side of the join to stick firmly to both pieces. For larger builds you can simply order more than one roll.
Powerful adhesive
The adhesive is designed to keep the tape in place over time, even with humidity and the temperature changes typical of a vehicle. For the best grip, apply it on clean, dry and dust-free insulation, press it firmly along its whole length and avoid stretching it too much so that it does not pull back afterwards.
Thermal and acoustic continuity
Small gaps between insulation sheets let warm air reach the cold metal, which causes condensation and reduces efficiency. By sealing them, the tape helps keep temperature stable inside, prevents moisture from collecting in hidden corners and also reduces vibration and noise, so the result is a warmer and quieter interior.
Flexible, black and discreet
Because it is made of flexible elastomeric material, the tape bends around ribs, curves and corners without wrinkling or cracking. The black colour blends with the insulation and is not visible once the panels are mounted. It is a small accessory, but it makes a clear difference to the durability and finish of the whole insulation job.
What's included
✓ 1 roll of Vanflex joining tape
✓ Length: 15 m
✓ Width: 5 cm
✓ Black flexible elastomeric material with adhesive
Size and who it is for
With 15 metres of tape, one roll covers the joins of many insulation jobs. Count the joins on your walls, roof and doors to estimate how much you need, and add a margin for corners and overlaps. It is aimed at DIY builders and workshops insulating campervans, motorhomes, caravans and work vehicles.
✓ Length: 15 m per roll
✓ Width: 5 cm
✓ Use: joins on walls, roof and doors
✓ Suits 10 mm and 19 mm Vanflex rolls
Application advice
Apply the tape once the insulation pieces are fitted. Make sure the surface is clean, dry and free of dust or grease; any dirt reduces adhesion. Cut the length you need, peel back the liner progressively and centre the tape over the join so that both pieces of insulation are covered equally.
Press firmly along the whole length, ideally with a small roller or a cloth, to remove air pockets. Avoid stretching the tape while you apply it. Work at room temperature whenever possible, and tape corners and edges carefully, as these are the places where gaps usually appear.
Tips to get the most out of it
✓ Fit all insulation pieces first, then tape the joins.
✓ Clean the surface before applying the tape.
✓ Centre the tape so it covers both sides of the join.
✓ Press firmly from one end to the other.
✓ Do not stretch the tape while applying it.
✓ Also tape edges around windows, vents and cable passages.
Technical specifications
| Product | Thermal insulation tape |
| Properties | Thermal and acoustic insulation |
| Material | Flexible elastomeric insulation |
| Dimensions | 15 m x 5 cm |
| Colour | Black |
| Applications | Walls, roof, doors |
| Model | VANFLEXCINTA |
| Reference | VANFLEXCINTA |
Joining tape compared with the Vanflex 15 m² rolls
| Joining tape (this) | Roll 19 mm · 15 m² | Roll 10 mm · 15 m² | |
|---|---|---|---|
| Product | Joining tape | Insulation roll | Insulation roll |
| Dimensions | 15 m x 5 cm | 10 m x 1.5 m | 10 m x 1.5 m |
| Thickness | — | 19 mm | 10 mm |
| Function | Seals joins | Insulates surfaces | Insulates surfaces |
| Colour | Black | White / grey | White / grey |
| Reference | VANFLEXCINTA | VANFLEX3 | VANFLEX1 |
The rolls insulate the surfaces of the van and the tape seals the joins between their pieces. They are designed to be used together, including with the 7.5 m² formats.
Ideal for
✓ Sealing joins between insulation sheets
✓ Finishing campervan walls, roof and doors
✓ Avoiding thermal bridges and gaps
✓ Motorhomes, caravans and work vehicles
✓ DIY builders and workshops
Care and maintenance
✓ Store the roll in a cool, dry place away from direct sun.
✓ Keep the liner on until the moment of application.
✓ Protect the edges of the roll from dust and dirt.
✓ Check taped joins before closing the panels and press any lifted edge.
Frequently asked questions about the Vanflex joining tape
What is the joining tape used for?
It seals the joins between pieces of elastomeric insulation on walls, roof and doors. That way the insulating layer stays continuous and you avoid thermal bridges and small gaps where moisture and noise can get through. It is the usual finishing step before fitting interior panels.
How many metres does one roll have?
Each roll measures 15 metres long and 5 cm wide. The best way to estimate how much you need is to add up the length of all the joins on walls, roof and doors and leave a margin. For large builds you can order several rolls at once.
Is it compatible with the Vanflex 10 mm and 19 mm rolls?
Yes. It is designed for the Vanflex rolls sold by Braguscamp, in 10 mm and 19 mm thickness and in 7.5 m² and 15 m² formats. It can also be used on other flexible elastomeric insulation, as long as the surface is clean and dry.
Can I use it on other insulation brands?
It is made for elastomeric insulation in general, so it works on most similar materials. As always with adhesives, test a small piece first if you are unsure, and make sure the surface is free of dust, grease and humidity before applying it.
Does it stick well with humidity and heat?
The adhesive is designed for a firm, durable hold and the material resists humidity. For the best result, apply it on dry insulation, press firmly along the whole length and avoid stretching it. Good preparation is what makes the bond last in a vehicle.
What colour is it?
The tape is black. That makes it discreet against the insulation and invisible once the interior panels are mounted, so it does not affect the final look of your van conversion.
Do I need tools to apply it?
No special tools are needed. Cut the length you need with scissors or a knife, peel off the liner and press it onto the join. A small roller or a cloth helps remove air pockets and improves adhesion along the whole length.
What is the difference between the tape and the insulation rolls?
The rolls are the insulating material that covers walls, roof and doors, available in 10 mm or 19 mm and in 7.5 m² or 15 m². The tape is the accessory that seals the joins between those pieces. You need both for a complete, continuous job.
Do you ship to my country?
Braguscamp ships to Spain and to many European countries. Delivery options and cost for your address are shown at checkout. For any question, write to us on WhatsApp at +34 690 086 820 or by email at info@braguscamp.com.
Can I pay in instalments and is there a guarantee?
Yes. At checkout you can choose flexible payment with seQura to split your order into instalments, which is handy when you buy all the insulation material at once. Every product includes the 3-year legal guarantee.
Finish your insulation with Vanflex tape
Add the Vanflex joining tape to your cart on braguscamp.com together with your insulation rolls, or ask us on WhatsApp or at info@braguscamp.com.

Vanflex Insulation at Braguscamp
Have questions about vanflex Insulation or want to know which option suits you best? Our team will advise you with no obligation on WhatsApp. Discover more products in the Braguscamp online shop.